Normal lead-acid batteries produce hydrogen gas when charged. The sealed edition has a valve to allow this gas to escape. To reduce loss of fluid or abilities damage from too much gas being produced, sealed batteries are designed never to get fully charged. Due to this they can be more likely to sulfation, this is a build up of sulfur which ultimately means they can no longer hold a sufficient charge.
There are methods you can employ to make certain your battery achieves its maximum operational life. Plus if you be trained how to recondition a sealed lead-acid battery you can extend this life considerably.
1. Always store fully charged.
If your battery is not going to be used for a period of time it will eventually lose its charge on account of its organic and natural charge depletion. If you allow the battery to develop into fully discharged it will very much shorten its life, because the build up of sulfur will be accelerated.
For this reason if you are storing a lead-acid battery, every so extensively, usually at 6 month periods, you want to apply a topping charge to keep it from going flat and being damaged.
2. Avoid repeated deep discharges.
A deep discharge is when the battery is run almost to this is flat or depleted state. It is much stronger for the battery to be charged from a semi used state each time, as opposed to a repeated accomplished charge. This puts less stress on the battery, and decreases the rate at which the battery killing sulfur deposits form. So you want to charge them little and extensively. If under normal usage this proves to be impossible, then you want to focus on using a better battery.
3. Prevent sulfation.
Paying attention to the way in which you charge your battery can go an excellent distance to minimizing sulfation. Using an fair quality battery charger have to assist to achieve this. Many revolutionary chargers have software that helps maintain optimum charge, prevent over charging, and the related problems this brings.
4. Recondition by getting rid of sulfur build up.
Using a specialized battery charger that produces a high current pulse will break down the sulfur crystals on the battery plate. This will convert the plates back into the original lead and lead oxide blend, and the battery fluid into sulfuric acid again. This will restore a failing battery back to a usable state.
Following these usage tips, and learning how to recondition a sealed lead-acid battery, will make your battery give first-class service over a longer period of time. The longer you use it, the longer it stays out of landfill. This is brilliant for the environment and your bank balance.
If you want to to become aware of more approximately how to restore or recondition old batteries that you thought were dead, and were going to throw away. Go to the recondition old batteries guide. Take a appear at www.reconditionoldbatteries.blogspot.com for more tips.